http://www.opetrol.com/sblog/www.opetrol.comRainbowSoft Studio Z-Blog 1.8 Spirit Build 80722zh-CNCopyright www.opetrol.com. All Rights Reserved.Mon, 24 Nov 2008 16:34:18 +0800scc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_3759.htmlMon, 24 Nov 2008 16:33:52 +0800http://www.opetrol.com/sblog/ywjz/cnc_3759.htmlcnc system, its meaning is a large-scale computer at the same time control of several CNC machine tools. Later, as the scientific and technological progress, by the NC NC system for the development of CNC, each CNC machine tools from a computer to control, so the concept of the past DNC has lost its significance. The CNC system has been very sound, generally support the RS-232C communication function, that is, through the RS-232口receive or send processing procedures, a lot of CNC system can be realized while receiving N / C side machining process, which is the so-called The DNC, but not all of the CNC system will support this feature, there are some systems only the first to receive the processing procedures stored in the system memory, but not at the same time cutting, this form of transmission is generally block transmission. Workshop existing cnc complex system, the system used by the communications between the procedures are different, resulting in between are not compatible with the status quo, To the technical staff, operators of the programming and application bring a lot of inconvenience and greatly limit the transfer of parts of the processing. NC part of the old system, memory space is limited, more than one procedure, the machine has enough memory space on a large number of processes had to delete and type of repeated and frequent repetition of parts ready to work a lot of work to waste time, direct Impact on the efficiency of CNC machine tools, processing procedures have repeatedly affected the process of stability. A unit of CNC machine tools may use a variety of numerical control system, in accordance with the traditional networking approach is generally to every machine equipped with a single PC machine, for different numerical control system using a different communication procedures, the drawbacks are obvious The. Workshop and put a lot of computers, poor industrial environment, greatly shorten the life of the computer, and clutter is not conducive to management. The CNC equipment is to super-integrated, intelligent, network-oriented development, increasingly pc computers and other advanced features, most of the current NC equipment in a single operation in the form of the same needs as pc , Network transformation and realize the sharing of resources. DNC communications software to support various cnc system, to support various communications standards.]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_3759.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=90http://www.opetrol.com/sblog/cmd.asp?act=tb&id=90&key=1eaed4d7scc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_3964.htmlMon, 24 Nov 2008 16:32:27 +0800http://www.opetrol.com/sblog/ywjz/cnc_3964.htmlcnc system, direct drive feature fully integrated system "to achieve a bus-type high-grade numerical control system , Bus-drivers, high-speed and high precision of the key features of the organic integration, formed a complete system of control. Integration System technology, products from foreign-independent R & D and manufacturing companies, with independent intellectual property rights, suitable for a variety of high-grade NC The application of machine tools, high-grade numerical control machine tools to improve the performance. Surface Grinder compared with lathes, milling machines, such as use of numerical control system rather late, because of its numerical control system to the specific requirements. Over the last decade, with CNC technology, Grinder Dressing in a row on the wheel, automatic compensation, automatic exchange wheel, multi-table, automatic transmission and fixture parts, and other operational functions to be achieved, numerical control technology on the surface grinder gradually universal. Recent large-scale machine tools exhibition, CNC grinding machine in the whole Grinder in the account for the majority of the exhibits, full-featured CNC-mill, has already become mainstream in the development of high-grade NC-mill at the same time, began to actively in the development of low-grade NC-mill. Molding plane and grinding machine cnc system, the control shaft extension request flexible to control up to nine coordinates, of which six coordinates can be linked, the smallest pulse equivalent, the mobile equivalent and testing are equivalent 0.1μ m, also a mill-linear position sensor [grating feet, Inductosyn] the entire closed-loop manner. Strengthen the fixed grinding method: According to grinding parts of different shapes, there are four different methods of grinding, with sand Axle tilt angle control function, Arakawa grinding, Cumo, Jingmo, no grinding sparks a set of grinding cycle, Dresser compensation, relative to the dressing-dressing round of the direction of the normal control functions, the outer edge of dressing wheel radius Compensation, the system resolution can be set to 0.1 μ m, a compact cnc system.
]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_3964.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=89http://www.opetrol.com/sblog/cmd.asp?act=tb&id=89&key=5853bac2scc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_8413.htmlFri, 21 Nov 2008 17:00:49 +0800http://www.opetrol.com/sblog/ywjz/cnc_8413.htmlcnc development today, this in the fierce competition in the market Shachu tight encirclement of the servo cnc New Army, in the machine tool industry has received a good user of the word: both in different industries can meet the needs of the various series of high-performance servo cnc system products, or through the full range of integrated products, tailored for machinery manufacturers The custom control solutions, and Taiwan have their brand of "professional users and close to the" service concept has won the favor of market and user acceptance. 2007, Taiwan's servo products amounted to 100 per cent growth in the automation of many of Taiwan products in Badetouchou. 2008, Taiwan was such a remarkable achievement servo also continue. Delta Electronics Group subsidiaries - of Dentsu Inc. servo cnc product manager at Mr. Li Wenjian said: "This year, Delta servo cnc products will continue to maintain high growth rates, and efforts to enter the market share of the top five." In recent years, China's machine tool manufacturing standards of access to a larger increase, particularly in the field of metal-cutting, high technological contents of the cnccnc machine, gradually developing into a high-speed highway. For the development of the industry trend, and Taiwan amounted to the development of this area, the end of 2007 introduced a series of A + series of high-power servo products, to provide 3.0 kilowatts to 7.5 kilowatts high-powered servo, large metal-cutting machine tools to meet the high torque output Requirements. The end of 2008, Delta will be introduced to meet the small and medium-sized metal processing machines and high-speed high-precision processing requirements and specialized research and development of the A2 series of high-performance servo products. The two series of common characteristic is that the application of the latest servo control testing and gain control technology, the encoder resolution of 20 bit resolution, the servo system can be more accurate, more intelligent, easier to use. On the present situation, the two types of stocks or tracking, First IPO, the recent weakness in the IPO by market factors and a substantially lower, so as to the rebound in the secondary market provides a space for imagination, the West-shares, France Cnc, and other species is a result of this, especially because of cnc in yesterday's public information has emerged in institutions for the seat, which is conducive to the stock rebounded trend.
]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_8413.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=88http://www.opetrol.com/sblog/cmd.asp?act=tb&id=88&key=782bf215scc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_9697.htmlFri, 21 Nov 2008 16:59:10 +0800http://www.opetrol.com/sblog/ywjz/cnc_9697.htmlcnc diamond beaded saw directly from the Huangliao on forming a flower-cutting products.
Flower line blank and forming the rough on the flower-forming process and optional equipment. Using cnc prototyping processing equipment, according to the flower-shaped contour of the preparation process, cnc bridge cutting machine, cnc milling machines or equipment cnc machining centers on the diamond saw blade or cylindrical cutter in the CNC control system, in accordance with the procedural requirements The trajectory of movement, took to complete the formation of contour lines or rough cutting; cnc diamond processing beaded flowers sawing line, cnc process control system in accordance with the blank with the material before and after the campaign vehicle of change and Wire movement formed the outline of the shape of flowers .
The use of cnc diamond beaded saw directly from Huangliao on forming a flower-cutting products.
Forming the use of larger diamond cutter processing, changes in the contour of the ups and downs of small and medium-sized flower products, the first blank need to carry out the rough Qiejia to reduce the time and forming the diamond forming tool consumption. Cnc or can use the bridge program-controlled cutting machine, saw blade can swing around the processing centres or cnc milling machines and other equipment hydraulic profiling rough blank. You can use artificial knock chisel out after the rough cut flowers line blank on the part of the surplus, then use the diamond cutter equipped with forming the horizontal milling mill forming a straight-line spend the contours of the surface. Arc-line forming spent the best use of cnc machining center or cnc milling machine.
The use of cnc machining centers, cnc milling machine or hydraulic profiling milling machine, can be rough and forming processes together, directly from the molding on the cutting blank by the CNC control system with the electrical rotary table, cnc machining centers of power saw Can be the first under the control of the cnc, Motor Driver Saw 0 ~ 360 ° rotation, the processing of soft stone, can also use the standard cylindrical cutter-type knives.
]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_9697.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=87http://www.opetrol.com/sblog/cmd.asp?act=tb&id=87&key=dcc6bf3escc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_1138.htmlThu, 20 Nov 2008 17:01:19 +0800http://www.opetrol.com/sblog/ywjz/cnc_1138.htmlcnc-processing complete sets of equipment development, manufacturing and sales. Companies main highlight, product focus, amongst the domestic steel structure series cnc processing complete sets of production equipment the leading position of the current market share of 60 percent. Act last Friday by cnc landing in the small and medium-sized panels, the day was up 41 percent, Huan Shoulv as high as 86 percent, but this week two days before the Unit for Dieting, will be listed on the first day of full sets of old Zhuizhang funds, Continue to decline after the oscillation, the major funds Lagao fled obvious. The Unit also Gaokaidizou after the listing of new shares can not escape the fate. Wait-and-see short-term suitable. cnc following the law because after the listing of two successive Dieting, a new listing on the 12th lowest level since 8.76 yuan, only higher than the issue price of 6 cents. The company is recognized by the national high-tech enterprises, mainly engaged in mechanical and electrical integration cnc-processing complete sets of equipment development, manufacturing and sales. Law for holding main highlight, product focus, amongst the domestic steel structure series cnc processing complete sets of production equipment the leading position of the current market share of 60 percent. Act last Friday by cnc landing in the small and medium-sized panels, the day was up 41 percent, Huan Shoulv as high as 86 percent, but the previous two trading days last week, the Unit for Dieting, will be listed on the first day of full funding Zhuizhang trapped and later Fell to shocks, the major funds Lagao fled obvious. The Unit also Gaokaidizou after the listing of new shares can not escape the fate. Cnc law is a result of China's largest steel for processing to the target set for cnc processing equipment maker, specializes in mechanical and electrical integration of special steel structure cnc processing complete sets of equipment development, manufacturing and sales. Tower by the steel structure industry is national policy to support industry, the economic cycle fluctuations relatively small, relatively stable growth in the future. ]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_1138.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=86http://www.opetrol.com/sblog/cmd.asp?act=tb&id=86&key=0723732dscc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_2988.htmlThu, 20 Nov 2008 16:55:31 +0800http://www.opetrol.com/sblog/ywjz/cnc_2988.htmlcnc boring and milling machine as the company's main product, horizontal boring and milling machine And floor-boring and milling machine sales accounted respectively Cnc boring and milling machine from the lower reaches of demand, including: aerospace, shipbuilding, automobiles, electrical equipment, heavy machinery and railway equipment, and other fields, in the breakdown of industries, from the second half of the demand, including aerospace, Shipbuilding, power equipment, heavy machinery and railway equipment demand will remain strong pattern, and taking into account the wealth effect of the stock market, we expect the demand for the automobile industry will slow down in the second half, but in the lower reaches of the company in the proportion of demand, GM Equipment and special equipment as a share of over 80%, delivered equipment accounted less than 10 percent, we believe that the automobile industry sales growth slowdown will not affect the company's boring and milling machine business needs of the market.
While large companies leading products cnc boring and milling machine-sufficient, but we should note that the small machine tool products demand a significant decline, according to communications, small machine tool products decline in demand mainly due to the coastal areas of Zhejiang and small cars, Parts of the closure of processing enterprises, small machine tool products demand has also led to the decline in the amount of company stock increased substantially
Together, we believe that demand for downstream products led the company is widely distributed, and the second half of demand will remain stable trend.
Boring milling machine as the field of domestic enterprises, in floor-boring and milling machine industry market share of about 30 percent, horizontal boring and milling machine industry market share of about 25 percent, due to floor-boring and milling machine higher gross margin products, in recent years With floor-to boring and milling machine sales revenue share of the upgrade, the company consolidated gross profit margin machine products also will be improved, but because the floor-boring and milling machine market little capacity, the company's development strategy facing a "scale" "Effectiveness" of choice, from the company's development strategy of view: "horizontal boring and milling machine cnc, floor-boring and milling machine scale, shaver desktop boring and milling machine series, efficient processing center" in ensuring that the profitability of the company at the same time Expanding sources of income, and to ensure profitability of the company should become the primary strategy.]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_2988.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=85http://www.opetrol.com/sblog/cmd.asp?act=tb&id=85&key=773b4f8escc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_1388.htmlWed, 19 Nov 2008 17:16:36 +0800http://www.opetrol.com/sblog/ywjz/cnc_1388.htmlcnc system, its meaning is a large-scale computer at the same time control of several CNC machine tools. Later, as the scientific and technological progress, by the NC NC system for the development of CNC, each CNC machine tools from a computer to control, so the concept of the past DNC has lost its significance. The CNC system has been very sound, generally support the RS-232C communication function, that is, through the RS-232口receive or send processing procedures, a lot of CNC system can be realized while receiving N / C side machining process, which is the so-called The DNC, but not all of the CNC system will support this feature, there are some systems only the first to receive the processing procedures stored in the system memory, but not at the same time cutting, this form of transmission is generally block transmission. Workshop existing cnc complex system, the system used by the communications between the procedures are different, resulting in between are not compatible with the status quo, To the technical staff, operators of the programming and application bring a lot of inconvenience and greatly limit the transfer of parts of the processing. NC part of the old system, memory space is limited, more than one procedure, the machine has enough memory space on a large number of processes had to delete and type of repeated and frequent repetition of parts ready to work a lot of work to waste time, direct Impact on the efficiency of CNC machine tools, processing procedures have repeatedly affected the process of stability. A unit of CNC machine tools may use a variety of numerical control system, in accordance with the traditional networking approach is generally to every machine equipped with a single PC machine, for different numerical control system using a different communication procedures, the drawbacks are obvious The. Workshop and put a lot of computers, poor industrial environment, greatly shorten the life of the computer, and clutter is not conducive to management. The CNC equipment is to super-integrated, intelligent, network-oriented development, increasingly pc computers and other advanced features, most of the current NC equipment in a single operation in the form of the same needs as pc , Network transformation and realize the sharing of resources. DNC communications software to support various cnc system, to support various communications standards.
]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_1388.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=84http://www.opetrol.com/sblog/cmd.asp?act=tb&id=84&key=4a947a98scc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_5698.htmlWed, 19 Nov 2008 17:15:55 +0800http://www.opetrol.com/sblog/ywjz/cnc_5698.htmlcnc system supporting the industrialization of technology" focus on corporate projects, Guangdong Province, 20 key equipment One of the manufacturing enterprise. Construction began in 1991, 10 years is committed to professional development, production CNC system, servo drives and servo motor, the promotion of universal CNC machine tools, numerical control machine tools in trade, now has developed into a set science, education, Workers and trade in one of the major high-tech enterprises. 2000-2006, product production and sales for seven consecutive years with Habitat domestic industry first, is the country's largest production base for CNC machine tools. Surface Grinder compared with lathes, milling machines, such as use of numerical control system rather late, because of its numerical control system to the specific requirements. Over the last decade, with CNC technology, the grinder on the wheel for repair, automatic compensation, automatic exchange wheel, multi-table, automatic transmission and fixture parts, and other operational functions to be achieved, numerical control technology on the surface grinder gradually universal. Recently large domestic machine tool exhibition, CNC grinding machine in the whole grinder in the account for the majority of the exhibits, full-featured CNC-mill, has already become mainstream in the development of high-grade NC-mill at the same time, began to actively in the development of low-grade NC-mill . A few days ago, set a mechanical, electrical, fluid integration, high efficiency, high-precision, highly automated dynamic value seized in the car-lorry crane company for success and trial production on the market. This is the city to strengthen independent research and development for vehicles made another new achievement. This new dynamic to abandon the original seizure value of the weight stack, use of hydraulic oil pressure to simulate the weight, using feedback signals to the sensor and then by the CNC control system contrast, 300,000 tons within the error of not more than five kilograms , With a wide range of promotional and practical value. NC technology is the key to the development of NC software development; have a good CNC system platform, software development is the basis of NC. Shanghai Co., Ltd. opened summed up the NC for many years to open NC system research and development lessons, study and research of the NC system of open standards, the establishment of a fully independent innovation based on Windows and Linux operating systems double the number of open Control System software platform and the platform has been developed based on bus technology NC mid-range embedded systems, and milling machines and lathes used for future rapid development of other applications and equipment to lay a solid foundation. This development in China's high-end cnc system, and we reduced the level of foreign technology gap between the NC, is of great significance.
]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_5698.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=83http://www.opetrol.com/sblog/cmd.asp?act=tb&id=83&key=f24df3c2scc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_2347.htmlTue, 18 Nov 2008 16:35:45 +0800http://www.opetrol.com/sblog/ywjz/cnc_2347.htmlcnc key technology applications and demonstrations" and "cnc key technology and equipment supporting the industrialization of technology and application" and other projects.
These projects total R & D funds invested 542 million yuan, China's provision of 124 million yuan, has arranged for 20 kinds of technical difficulty, high prices of imports or foreign countries on China's restrictions on imports of sophisticated equipment for large cnc; support a Cnc machine approved midrange systems and cnc production base supporting the industrialization of technological research, conducting a cnc system and servo-driven technology, high-speed spindle, and other key features, and so on the basis of a number of common technology research. At present, these scientific and technological projects have achieved initial results, some of the key technology of a breakthrough, a group of highly sophisticated research and development of large cnc equipment, based on common technology research and application has been made effective. Key national organization of 20 kinds of sophisticated technological equipment cnc large-scale research has been completed and is currently the majority of delivery. If the second Machine Tool Plant of Qiqihar, Qinghua University and Harbin Electric plant the goal of common development of mixed-5-axis machine, mainly used for processing large-scale turbine blades, and other surface components; second machine tool plant in Jinan and Beijing University of Aeronautics and Astronautics on the production 5-axis gantry high-speed processing machine, mainly used for processing "diversion" of the large pumps blade; Beijing Institute of Electrical and Mechanical Services of high-tech joint-stock companies for the development of the Oriental Turbine Factory Leaves 5-axis machining centers to meet the 600 MW steam turbine blades of large-scale processing Quality and processing efficiency requirements, import prices only one-third of similar machines.
Shenyang Machine Tool Development of the multi-axis milling complex vehicle processing center, mainly for the body, precision connectors, commutator and speed into a spiral with pieces of leaves, round diamond teeth bit parts in complex shapes, such as processing, particularly for defense industry The development of new technology products. Cnc machine by the Nanjing Research and Development Limited autonomy large cnc turning on a unit, with torque, rigid, and high accuracy with two dynamic characteristics of good characteristics, is the processing of large parts pumps much-needed equipment. Jiangsu Duoleng cnc machine developed by the joint-stock companies 5-axis floor-cnc Xitang Chuang, mainly for large and medium-sized diesel engines, large and medium-sized complex structure of processing, particularly applicable to the surface with space complex parts fast, efficient processing.

]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_2347.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=82http://www.opetrol.com/sblog/cmd.asp?act=tb&id=82&key=5a7ba658scc3000scc@hotmail.com (tc)http://www.opetrol.com/sblog/ywjz/cnc_6244.htmlTue, 18 Nov 2008 16:27:52 +0800http://www.opetrol.com/sblog/ywjz/cnc_6244.htmlcnc speculation a new 300 million yuan of funds. Cnc Act last Friday by small and medium-sized landing board, 300 million yuan of funds was admitted to speculation, to the day the stock was up 41 percent, the lowest price and the closing price difference of only 9 percent of the space. In the second trading day on Dieting circumstances, even in the lowest access to funds without a profit. The stock listed on the first day of Huan Shoushuai as high as 86 percent, but there is still 14 per cent of the cash position of the weak trend, which found that some positions than the first day of earnings situation worse, like a hurry to sell, all of this Its follow-up trend of tremendous pressure. The stock listed only four trading days, but there are two days to Dieting closed yesterday, the stock still fell 6.2 percent. The stock listed on the first day of the highest price reached 12.49 yuan, closed at 9.38 yuan yesterday.
In the law for the purchase of cnc0.035% success rate, if sold on its first day of time, a new yield in the 0.014 to 0.015 percent between the years of yield equivalent to only 0.36 percent, although far less in a bank , But is still risk-free income. In contrast, speculation on its first day of participation in new funding, not risk-free income, net loss in more than 10 per cent level, some funds are still not cash. Display cnc machine tools, construction machinery and industrial automation, with the focus on a total of 2,698 booths, industrial automation area over the previous few booths increased by 50 percent or more, cnc machine booth area an increase of 28 percent. From the United States, Britain, Germany, Japan, Italy, Russia and other countries and Hong Kong, Taiwan and other regions of 23 countries and regions in the well-known exhibitors. In the industrial automation, Siemens, Mitsubishi Electric, Emerson, 000 can be, SEW, Shi Mai Sai, Weidmuller and Delta, and other famous companies have participated in the exhibition. Exhibits mainly used for equipment and the equipment manufacturing industry automation products, many of them creative, and the applicability of energy-saving features.
The machine tool for the C-axis with the cnc machine tool, precision machining parts to 2.5 microns, has reached even more than similar international products processing accuracy, but the price is much lower than similar imported products for enterprises and the state can save a lot of foreign exchange Input.
]]>tchttp://www.opetrol.com/sblog/ywjz/cnc_6244.html#commenthttp://www.opetrol.com/sblog/http://www.opetrol.com/sblog/feed.asp?cmt=81http://www.opetrol.com/sblog/cmd.asp?act=tb&id=81&key=c7af4221