High performance (compare with H plasma)
System |
Output current |
Piercing capability |
Edge start capability |
Duty cycle |
100% duty cycle |
AngelBlade |
20-130A |
25mm |
55mm |
60-80% |
125A |
H plasma |
20-125A |
25mm |
57mm |
100% |
125A |
System | AngelBlade 100EPro | H plasma | |||
Output current | 20-130A | 20-125A | |||
Piercing capability | 25mm | 25mm | |||
Edge start capability | 55mm | 57mm | |||
Duty cycle under max output current | 60-80% | 100% | |||
100% duty cycle | 125A | 125A |
Economical Plasma Cutting System
Handheld or mechanized plasma system for cutting
Capacity |
Thickness |
Cutting speed |
Handheld cut |
||
Reconmmended |
30mm |
400mm/min |
40mm |
170mm/min |
|
Severance |
57mm |
100mm/min |
Pierce |
25mm |
|
AngelBladeTM Key Technical Advantages
Non-high-frequency pilot arc, a foreign technology of high voltage pulse arc with high success rate of arcing and no interference to any system or AVTHC.
100% full inspection for main power components, which are the top-class brands imported from Europe.
Specially-made radiator with brazing sheet and design of air duct enable the machine to work for a long time in favorable temperature and improve its duty cycle.
The key part of torch is made of macromolecular materials for longer service life; Swirl ring technology is applied to airflow for greatly improving cutting quality and piercing capability.
AngelBlade E Series - Best Quality, Least Cost!
AngelBlade E series may be the first low cost air plasma power source acquired complete intellectual property rights. It would not interfere with any arc voltage THC. What’s more, the swirl ring technology applied by AngelBlade E series could remarkably improve the cutting quality and piercing thickness.
The favorable price and low-loss consumables will make your purchase cost
reduced substantially.
AngelBlade E Series Configuration:
Name |
Series No. |
Operator Manual |
AB-00021 |
Certificate |
AB-00031 |
Fuse |
AB-00041 |
Connecting Terminals |
AB-00051 |
Toolkit (Electrode, Nozzle,Spanner) |
AB-00061 |
Six-cell Plug |
AB-00071 |
Ground Wire |
AB-00081 |
Filter Regulator |
AB-00101 |
Mechanized Torch 7.0m |
ABCT-70m |
Handheld Torch 7.0m |
ABCT-70h |
Shield |
ABCT-10011 |
Retaining Cap |
ABCT-10021 |
30A-45A Nozzle |
ABCT-45031 |
45A-70A Nozzle |
ABCT-70031 |
70A-100A Nozzle |
ABCT-10031 |
100A-130A Nozzle |
ABCT-13031 |
Electrode |
ABCT-10041 |
AngelBlade Series Technical Parameters:
Parameters Type |
60E |
100E |
100EPro |
||
Rated Input Voltage V |
380V±10% 50Hz 3 phase AC* |
||||
Rated Input Current A |
13.3A |
22.3A |
30A |
||
No-load Voltage V |
380V |
||||
No-load Loss W |
/ |
||||
Output Current A |
20~60 |
25~100 |
30-130 |
||
Duty Cycle |
80% |
||||
Recommended mm |
20 |
30 |
35 |
||
Pierce mm |
16 |
20 |
25 |
||
Arc Strike |
Pulse (non-high-frequency) |
||||
Cooling |
Forced Air Cooling |
||||
Size (WxHxL) mm |
360×510×550 |
||||
Weight kg |
40 |
50 |
60 |
Parameters Type | 100EPro | |
Rated Input Voltage V | 380V±10% 50Hz 3 phase AC* | |
Rated Input Current A | 30A | |
No-load Voltage V | 380V | |
No-load Loss W | / | |
Output Current A | 25~100 | |
Duty Cycle | 80% | |
Recommended mm | 35 | |
Pierce mm | 25 | |
Arc Strike | Pulse (non-high-frequency) | |
Cooling | Forced Air Cooling | |
Size (WxHxL) mm | 360×510×550 | |
Weight kg | 60 |
* 60E, 100E: 220V 3-phase/ single phase is optional.
AngelBlade 100EPro Series:
AB 100EPro | ||||||||
Amperage(A) | Material | Torch-Distance of Workpiece(mm) | Initial Pierce Height(mm) | Thickness(mm) | Pierce DelayTime(S) | Arc Voltage(V) | Optimum Cutting Speed(mm/min) | Max Cutting Speed(mm/min) |
130A | Carbon Steel | 1.5 | 3.8 | 6 | 0.5 | 142 | 5000 | 5700 |
8 | 0.8 | 146 | 3700 | 4500 | ||||
10 | 1 | 146 | 2700 | 3200 | ||||
12 | 1.2 | 150 | 2100 | 2450 | ||||
4.5 | 16 | 1.5 | 155 | 1250 | 1550 | |||
20 | 2.5 | 160 | 950 | 1050 | ||||
25 | 3.5 | 164 | 550 | 750 | ||||
Edge Cutting | 30 | 168 | 450 | |||||
35 | 172 | 280 | ||||||
40 | 178 | 230 | ||||||
Stainless Steel | 1.5 | 3.8 | 6 | 0.5 | 140 | 7200 | 7000 | |
10 | 0.5 | 145 | 2300 | 3500 | ||||
12 | 0.8 | 148 | 1800 | 2300 | ||||
4.5 | 16 | 1.2 | 155 | 1200 | ||||
25 | 1.8 | 158 | 500 | |||||
Edge Cutting | 30 | 165 | 320 | |||||
Alumium | 1.5 | 3.8 | 6 | 0.5 | 145 | 7000 | 8000 | |
10 | 0.6 | 150 | 2800 | 3500 | ||||
12 | 0.8 | 160 | 1800 | 2400 | ||||
4.5 | 16 | 1.2 | 165 | 1400 | 1800 | |||
25 | 1.8 | 168 | 750 | |||||
Edge Cutting | 30 | 175 | 400 |
The max cutting speed refers to the highest speed to be achieved when cutting materials without considering the cutting quality of kerf. While the optimum cutting speed can ensure a better kerf angle, free of dross and a better cutting surface. For every cutting system in different THC systems, torches, air pressure or other cutting conditions, the optimum cutting speed and cutting quality of kerf can be achieved only after adjustment.
Beijing ESS Ltd.. takes environment stewardship as its core value. AngelBlade series meet the standard of ISO 9001:2008 in design and manufacturing process.
Please refer to safety signs and related safety regulation for avoiding injury. Watch out for electric shock,or hand burn by moving parts and thermal objects. Please put on weld cap, use suitable filter glass and wear protective suit. Contact Beijing ESS Ltd.. and ask for the method of reducing electromagnetic field on work site.
Beijing ESS Ltd..
Bld.4, XiuZhou Industrial Park, 228 Hong Ye Rd, JiaXing 314031 China
Email: info@opetrol.com info@opetrol.com
Skype: info-abplasma
Long life! four hours of continuous cutting!
Consumable
Shield |
Retaining Cap |
Nozzle |
Electrode |
Torch |
|
ABCT-10011 |
ABCT-10021 |
ABCT-13031 |
ABCT-10041 |
ABCT-70M |
|
|
![]() |
|
Shield | ABCT-10011 |
Retaining Cap | ABCT-10021 |
Nozzle | ABCT-10031 |
Electrode | ABCT-10041 |
Torch | ABCT-70M |
Torch
Mechanized |
|
ABCT-70M |