AngelBlade 80A plasma cutting systems high performance (compare with H plasma)
System |
Output current |
Piercing capability |
Edge start capability |
Duty circle under max output current |
100% duty circle |
CPC and arc pressure ratio |
AngelBlade |
25-80A |
20mm |
40mm |
60-80% |
62A |
optional |
H plasma |
25-85A |
20mm |
38mm |
60-80% |
66A |
optional |
Economical Plasma Cutting Systems AngelBladeTM Key Technical Advantages
Key Advantages |
Details |
Major functions |
Cutting, marking, gouging, gridding, and support lower current at turning point; |
Intelligent power |
Inbuilt control system;updates via software; |
Reliability |
Self-detect function of correcting the main transformer bias; Double-overflowing protection;high or low voltage and verheating protection; |
Excellent performance |
DSP fuzzy logic control and self-adaptive control technology leads to success of arc strike, stable current and less drows. |
External digital interface |
CAN, USB and DEVICE NET enables networking; |
20% of energy-saving |
Use IGBT inverter technology with the temperature-controlled fan; |
Database of cutting craft(optional) |
Save current and voltage in time,make analysis on cutting data. |
Description:
AngelBladeTM plasma cutting systems can work with half cost and good cutting quality, AngelBladeTM power source can offer you an economical and intelligent plasma cutting systems. The core technology of AngelBladeTM 80A plasma cutting machine is sure to have a stable cutting quality even in unfavorable working conditions. What’s more,its powerful intelligent control system and editable database of cutting craft make customers have high expectation of the extended functions of AngelBladeTM 80A plasma cutting machine.
Name |
Series No. |
Operator Manual |
AB-00020 |
Warranty Card |
AB-00030 |
Certificate |
AB-00040 |
500A Earth Clamp |
AB-00050 |
16mm2 Ground Wire/ 2m length |
AB-00060 |
DKJ16-1 Welding Cable Plug |
AB-00070 |
Φ8 Oxygen Pipe |
AB-00080 |
Φ12-Φ16 Clamp |
AB-00090 |
Mechanized Torch Φ35mm/ 7.6m |
ABCT-76M |
Mechanized Torch Φ35mm/10.7m |
ABCT-107M |
Mechanized Torch Φ35mm/15.2m |
ABCT-152M |
Handheld Torch 7.6m |
ABCT-76H |
Handheld Torch 10.7m |
ABCT-107H |
Handheld Torch 15.2m |
ABCT-152H |
100A Shield |
ABCT-10010 |
100A Retaining Cap |
ABCT-10020 |
100A Nozzle |
ABCT-10030 |
100A Electrode |
ABCT-10040 |
100A Swirl Ring |
ABCT-10050 |
40-80A Shield |
ABCT-40810 |
40-80A Retaining Cap |
ABCT-40820 |
40-80A Electrode |
ABCT-40840 |
40-80A Swirl Ring |
ABCT-40850 |
60A Nozzle |
ABCT-06030 |
40A Nozzle |
ABCT-04030 |
80A Nozzle |
ABCT-08030 |
AngelBlade Series Technical Parameters:
Parameters Type |
60A |
80A |
100A |
|
Input Voltage(U1 ) |
380V±10% 50Hz 3 phase AC |
|||
Input Current(I1 ) |
9.5A |
13.6A |
22.4A |
|
Input Power |
6.5kW |
9kW |
13.8kW |
|
Floating Voltage |
307V±5% |
320V±5% |
||
No-load Loss |
30W |
|||
Output Current Range(I2) |
20~60A |
25~80A |
30-100A |
|
Current IndicationPrecision |
2.5 degree |
|||
Power Factor |
COSφ≥0.85 |
|||
Efficiency |
η≥85% |
|||
Insulation Degree |
F |
|||
Enclosure Protection Class |
IP23S |
|||
Rated Duty Circle |
60% (60A/104V) |
60% (80A/112V) |
60% (100A/120V) |
|
100% (46A/98V) |
100% (62A/105V) |
100% (93A/116V) |
||
Feature of external power |
Sharp drop of constant current |
|||
Maximum Severance(mm) |
35 |
40 |
50 |
|
Recommended(mm) |
20 |
25 |
32 |
|
Pierce Cut (mm) |
16 |
20 |
22 |
|
Arc Strike |
Not high-frequency |
|||
Cooling |
Air cooling |
|||
Dimension (W×H×L) |
290×503×603 |
320×567×650 |
||
Net Weight of Power |
33kg |
46kg |
Parameters Type | 80A |
Input Voltage(U1 ) | 380V±10% 50Hz 3 phase AC* |
Input Current(I1 ) | 13.6A |
Input Power | 9kW |
Floating Voltage | 307V±5% |
No-load Loss | 30W |
Output Current Range(I2) | 25~80A |
Current IndicationPrecision | 2.5 degree |
Power Factor | COSφ≥0.85 |
Efficiency | η≥85% |
Insulation Degree | F |
Enclosure Protection Class | IP23S |
Rated Duty Circle | 60%(80A/112V) |
100%(62A/105V) | |
Feature of external power | Sharp drop of constant current |
Maximum Severance(mm) | 40 |
Recommended(mm) | 25 |
Pierce Cut (mm) | 20 |
Arc Strike | Not high-frequency |
Cooling | Air cooling |
Dimension (W×H×L) | 290×503×603 |
Net Weight of Power | 33kg |
* 220V 3-phase is optional.Cutting Samples
![]() |
|
|
Marking sample |
Piercing cutting 10mm |
Piercing cutting 16mm |
Handheld or mechanized plasma cutter systems for cutting and gouging metal
Capacity |
Thickness |
Cutting speed |
Handheld cut |
||
Reconmmended |
25mm |
320mm/min |
30mm |
180mm/min |
|
Severance |
38mm |
125mm/min |
Pierce |
20mm |
|
Metal removal rate |
Groove profile |
Gouge capacity |
6.0mm(.23”)D×7.0mm(.27”)W |
AB 80A plasma cutting systems | ||||||||
Amperage(A) | Material | Torch-Distance of Workpiece(mm) | Initial Pierce Height(mm) | Thickness(mm) | Pierce DelayTime(S) | Arc Voltage(V) | Optimum Cutting Speed(mm/min) | Max Cutting Speed(mm/min) |
80A | Carbon Steel | 1.5 | 3.8 | 3 | 0.5 | 120 | 6500 | 8000 |
4 | 0.8 | 120 | 5200 | 6000 | ||||
6 | 1 | 122 | 3200 | 4000 | ||||
8 | 1.2 | 124 | 2200 | 3000 | ||||
10 | 1.2 | 126 | 1500 | |||||
4.5 | 12 | 1.5 | 128 | 1250 | ||||
16 | 1.8 | 130 | 855 | |||||
20 | 134 | 520 | ||||||
Edge Cutting | 25 | 138 | 350 | |||||
30 | 140 | 165 | ||||||
Stainless Steel | 1.5 | 3.8 | 3 | 0.5 | 120 | 6500 | 7000 | |
6 | 0.5 | 122 | 3200 | 4000 | ||||
8 | 0.5 | 124 | 2200 | 3000 | ||||
4.5 | 12 | 1 | 128 | 1200 | ||||
20 | 1.5 | 134 | 500 | |||||
Edge Cutting | 25 | 138 | 320 | |||||
Alumium | 1.5 | 3.8 | 3 | 0.5 | 120 | 7000 | 8000 | |
6 | 0.5 | 122 | 3500 | 4000 | ||||
8 | 0.5 | 124 | 1500 | 2000 | ||||
4.5 | 12 | 1 | 128 | 1400 | 1800 | |||
20 | 1.5 | 134 | 800 | |||||
Edge Cutting | 25 | 138 | 500 |
Amperage(A) | 80A | |||||||||
Material | Carbon Steel | |||||||||
Torch-Distance of Workpiece(mm) | 1.5 | |||||||||
Initial Pierce Height(mm) | 3.8 | 4.5 | Edge Cutting | |||||||
Thickness(mm) | 3 | 4 | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 30 |
Pierce DelayTime(S) | 0.5 | 0.8 | 1 | 1.2 | 1.2 | 1.5 | 1.8 | |||
Arc Voltage(V) | 120 | 120 | 122 | 124 | 126 | 128 | 130 | 134 | 138 | 140 |
Optimum Cutting Speed(mm/min) | 6500 | 5200 | 3200 | 2200 | 1500 | 1250 | 855 | 520 | 350 | 165 |
Max Cutting Speed(mm/min) | 8000 | 6000 | 4000 | 3000 |
Amperage(A) | 80A | |||||
Material | Stainless Steel | |||||
Torch-Distance of Workpiece(mm) | 1.5 | |||||
Initial Pierce Height(mm) | 3.8 | 4.5 | Edge Cutting | |||
Thickness(mm) | 3 | 6 | 8 | 12 | 20 | 25 |
Pierce DelayTime(S) | 0.5 | 0.5 | 0.5 | 1 | 1.5 | |
Arc Voltage(V) | 120 | 122 | 124 | 128 | 134 | 138 |
Optimum Cutting Speed(mm/min) | 6500 | 3200 | 2200 | 1200 | 500 | 320 |
Max Cutting Speed(mm/min) | 7000 | 4000 | 3000 |
Amperage(A) | 80A | |||||
Material | Alumium | |||||
Torch-Distance of Workpiece(mm) | 1.5 | |||||
Initial Pierce Height(mm) | 3.8 | 4.5 | Edge Cutting | |||
Thickness(mm) | 3 | 6 | 8 | 12 | 20 | 25 |
Pierce DelayTime(S) | 0.5 | 0.5 | 0.5 | 1 | 1.5 | |
Arc Voltage(V) | 120 | 122 | 124 | 128 | 134 | 138 |
Optimum Cutting Speed(mm/min) | 7000 | 3500 | 1500 | 1400 | 800 | 500 |
Max Cutting Speed(mm/min) | 8000 | 4000 | 2000 | 1800 |
The max cutting speed refers to the highest speed to be achieved when cutting materials without considering the cutting quality of kerf. While the optimum cutting speed can ensure a better kerf angle, free of dross and a better cutting surface. For every cutting system in different THC systems, torches, air pressure or other cutting conditions, the optimum cutting speed and cutting quality of kerf can be achieved only after adjustment.
Beijing ESS Ltd.. takes environment stewardship as its core value. AngelBlade series meet the standard of ISO 9001:2008 in design and manufacturing process.
Please refer to safety signs and related safety regulation for avoiding injury. Watch out for electric shock,or hand burn by moving parts and thermal objects. Please put on weld cap, use suitable filter glass and wear protective suit. Contact Beijing ESS Ltd.. and ask for the method of reducing electromagnetic field on work site.
Beijing ESS Ltd..
Bld.4, XiuZhou Industrial Park, 228 Hong Ye Rd, JiaXing 314031 China
Email: info@opetrol.com info@opetrol.com
Skype: info-abplasma
Long life! four hours of continuous cutting! *AngelBlade A Series can replaceable PM 1650!
Plasma cutter consumables
Shield |
Retaining Cap |
Nozzle |
Electrode |
Swirl Ring |
Torch |
ABCT-40810 |
ABCT-40820 |
ABCT-06030 |
ABCT-40840 |
ABCT-40850 |
ABCT-76M |
|
![]() |
|
Shield | ABCT-40810 |
Retaining Cap | ABCT-40820 |
Nozzle | ABCT-06030 |
Electrode | ABCT-40840 |
Swirl Ring | ABCT-40850 |
Torch | ABCT-76M |
Plasma cutter torch
Mechanized |
|
ABCT-76M |
|
Handheld |
|
optional |